I ordered a leather Bradington Young chair and cannot return it because it came from North Carolina and I live in Louisiana and this is my problem, it is way to high for me and the I don't like the swivel at all now that I have it. BY did send me a new cushion to see if that would help with the height of the seat but it really didn't. Too expensive so I have to keep it.
My husband has tied it off with tie wraps to hold it still for time being. Is there any correct way to remove the swivel only off this chair? I haven't been able to find out thru Bradington Young. #7012-SG - Bradington Young Mason Swivel Glider Recliner
Thanks for any advice.
Debbie Robillard
Baton Rouge, LA
Sure, Debbie, the swivel mechanism is held on with four screws and then it will come right off. But it will be too low, you need legs of some kind. My suggestion is to get four sets blocks of scrap wood in various heights, say 1", 2" and 3". Try them on all four corners and see which you like the best. If it turns out to be say...1", then your selling dealer may be able to get some simple finished wedge legs for you. If they can't I can order them from Hancock and Moore (Bradington Young usually won't customize) at about $ 25 each and you can screw them on.
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.
Will I still be able to rock, that was the whole purpose of getting the chair, I love to rock.
Oh no- the rocker IS the mechanism. I though the object was to lower the chair.
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.