Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Another trip to Hancock and Moore's Factories May 2021

  1. #11
    Join Date
    Jul 2008
    Location
    Alexandria VA
    Posts
    15,887

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    My last entry on my trip to H&M last week.

    Here's a brand spanking new automated hide cutter machine they just installed 3 weeks prior. It's a remarkable machine as it should be as it cost $ 750,000! In the past, all leathers were marked out by hand and cut using electric shears. There was more waste and it was slower, plus the action of the shear cut would put a slight motion stress on the hide that would make it harder for the sewers to align the panels. This new cutter is very fast, extremely efficient, calculates yields per hide and alignment cuts are perfect. It's only suitable for finished leathers which are very consistent from one end of the hide to the other. Anilines will still be cut by hand as believe it or now they must be visually flow-matched which a computer cannot do. However 70% of all Hancock and Moore leather orders are finished, only 30% are aniline, so this machine will be cutting 2/3's of their total production.

    The hide is first put in the drop bin in a roll. Then the operator pulls it up into the scanner and marks the flaws with a light pen, and grades the leather. Prime areas are used for seating surfaces and fronts, tops of arms. Grade 2 areas for backs and sides (will have more imperfections) and Grade 3 for under panels and bottoms of seat cushions edges, plus welt and 6" x 8" dealer samples. Grade 4 is waste. The direction of the light pen determines the grade, up/down/left/right swipes.

    Click image for larger version. 

Name:	Cutter 1.jpg 
Views:	175 
Size:	194.6 KB 
ID:	13908

    Once the hide is fully marked and graded, it moves under the scanners and the computer lays out the entire cutting pattern, in this case this hide will be used on a Ghent High Back Recliner (which takes two hides total). The screen lays out the pattern to make maximum use of the hide, color codes the areas (red areas are waste) and computes usable data for the series.

    Click image for larger version. 

Name:	cutter 2.jpg 
Views:	164 
Size:	198.4 KB 
ID:	13909

    Onto the cutting! The machine uses lasers and a single Exacto-style blade to fly around the hide amazingly fast. It's all done in a few minutes and the blade has to be changed every two days.

    Click image for larger version. 

Name:	cutter 3.jpg 
Views:	171 
Size:	193.2 KB 
ID:	13910

    And here's what comes out a the end. All the pieces ready to be stacked and taken to the sewers. Not that the machine puts a hologram on each piece of leather identifying the panel so the person can label them for the hand-sewing. You will also see two dealer swatches cut out of this Juno hide in this photo.

    Click image for larger version. 

Name:	cutter 4.jpg 
Views:	157 
Size:	178.4 KB 
ID:	13911

    Everyone loves this machine and it was a big ticket item for them and not bought lightly. The sewers love it as it cuts with amazing precision and panel alignments are perfect. The Markers themselves underwent two weeks of intensive training to learn how to operate it, management likes it as it tells them the yield from each hide and that helps control costs. They always knew a percentage of each hide is waste or lower grade, but now they know exactly how much from each leather supplier in a series. That assists them in buying hides and negotiating prices.

    If you go to Handcock and Moore for a tour, be sure to ask to see this machine in operation, its pretty cool to watch it work.
    Duane Collie
    Straight answers from thirty-six years in the business.
    My Private Messages are Disabled - Please ask questions here in the forum.

  2. #12
    Join Date
    Jan 2022
    Location
    Jacksonville, Florida
    Posts
    215

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    Good Morning!!

    I was curious if they have resumed tours at the H&M factory? And if they have, how difficult is it to try and go when a specific model is being produced?

    Just curious if attempting to see a specific model or hyde is even possible.

    Cheers

  3. #13
    Join Date
    Jul 2008
    Location
    Alexandria VA
    Posts
    15,887

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    Sure, we can set that up. If there is a model in the queue, we find out estimated completion date and you can plan your trip then. if a ways out, it will take a second phone call closer to completion date. As the piece belongs to someone, they won't hold it for any length of time, its up to you do get there when its done, or within a day, and it would be during a weekday as they are closed weekends. if you want to see the plant running at capacity, tours should be Mon-Thurs. Fridays are "soft" days with only a few workers on the production lines and usually a half day of work.
    Duane Collie
    Straight answers from thirty-six years in the business.
    My Private Messages are Disabled - Please ask questions here in the forum.

  4. #14
    Join Date
    Jan 2022
    Location
    Jacksonville, Florida
    Posts
    215

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    Good Morning Duane,

    If possible, could you see if the Chelsea quilted sofa or the 2nd gen your way recliner or sofa will be in production anytime in the near future.

    Thanks so much!

  5. #15
    Join Date
    Jul 2008
    Location
    Alexandria VA
    Posts
    15,887

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    They have both the 6478-3-Q and the 2M90-PR units that will complete sometime in September. They are separate orders built at two different facilities, so they may not finish at the same time.
    Duane Collie
    Straight answers from thirty-six years in the business.
    My Private Messages are Disabled - Please ask questions here in the forum.

  6. #16

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    Thanks for sharing all that info; it was very interesting. We're former homeschoolers and loved to tour any factories in our area that allowed that for the public. You can tell the quality and pride they have in their work.

  7. #17
    Join Date
    Mar 2023
    Posts
    14

    Default Re: Another trip to Hancock and Moore's Factories May 2021

    Wow! What a beautiful piece of leather!

Similar Threads

  1. Hancock & Moore replacement core policies have changed Jan 2021
    By drcollie in forum Leather Upholstery
    Replies: 10
    Last Post: 05-30-2021, 07:36 PM
  2. Bradington Young Sale Period through March 27th 2021
    By drcollie in forum Announcements / Quick Tips
    Replies: 0
    Last Post: 03-18-2021, 12:51 PM
  3. No Sale Period in Feb 2021 / Price Increase - Hancock and Moore
    By drcollie in forum Leather Upholstery
    Replies: 0
    Last Post: 01-19-2021, 02:30 PM
  4. A trip to Hancock & Moore's Factories
    By drcollie in forum Leather Upholstery
    Replies: 23
    Last Post: 09-10-2020, 10:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •