Re: Find Arhaus Fabric for Repair
You won't find it. That's needle in a haystack stuff. The only shot you have at it is calling Arhaus direct to their factory offices and ask to speak to the fabric buyer. If you can get through to that person, they can tell you if it was a mill drop or if they just decided to drop it. If the mill still makes it, they *MAY* give you the name of the mill, but even then you are not going to get a yard or two, most mills require you to buy a bolt (50 yds) or they won't even talk to you about it.
Better solution is to go to a local fabric upholsterer and have them take the material off the underside of the seat cushion, about 3/4 of it so that only 2" remain to the front underside edge. Sew in a plain fabric panel to that underside. Now you have a bit of material they can make a patch with. And it will be a hand- sewn patch, but its better than nothing. Or reupholster the whole chair in a new fabric.
Please do not duplicate posts in the forum, takes time for me to remove the duplicate. Thanks.
Last edited by drcollie; 07-14-2020 at 09:34 AM.
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.