I don't have any sofas that seem to have a sliding cushion issue, most are just fine and have no special attachment points. If kids are jumping and rough-housing on the sofa - and being kids on it - I would expect the cushions may not be staying in place all that well. You can specify Velcro attachment points on the bottom at time of order, that's the best solution.
Yes, Taylor King does sleeper sectionals, you have to go into their Sleepworks segment, here's the link to the .pdf:
https://www.taylorking.com/PDF/Category/30_no_logo.PDF
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.
Duane, Will the Connor King sofa fit through a 31.5 inch bedroom door? It will need to be on end to get through the passageway and into the room. The delivery men will have to set it on end and maneuver it through the hallway and into the room. Is this possible? The doorway height is 96.5 inches and width is 31.5 inches. The bedroom is about 12x12 ft. Do you think a Queen-sized unit would fit better here? Thanks, Bill
The Conner will not even close at 31.5" - its too large and too heavy. You would be better off with the Hooker unit I have posted here on the forum, the arms come off that unit which is the magic ticket for that small a doorway. It should work, but not guaranteed. Mattress is not a true Queen Size (60" x 80"), a bit smaller.
http://www.myfurnitureforum.com/show...ghlight=hooker
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.
I'm sorry that it will not fit. The Connor sofa in your showroom was exceptionally comfortable! Unfortunately, I did not have a hand in design on this house and the optional double doors to that bedroom/study were not purchased.
Is Taylor king running any promotions on their sleep sofa? Do they have cushion firmness options? Do you have any personal preferences? Cary
Yes, they do run a promo on the Conner Series Sleepers in selected Portfolio fabrics, I'd have to reach out to my Taylor King sales rep to get the current promotion.
You cannot customize cores on this unit as they are specially developed or the Conner Sleeper and are integrated into the piece itself. There was a lot of time to get them "just right" and I would not change them as they work well.
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.
Do you still have this sleeper on your floor?
I do not. Sold the floor model. The problem with this unit is getting it through doorways and where many people want sleepers. At least half the customers who wanted to buy it, we could not deliver it. It needs a wide doorway (35" plus) and is too heavy to go up and down staircases. I now have the Hooker unit which is much easier to deliver.
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.
Our front door is 42” W, and it would be going straight into the open room from the entry. Curious about the hooker unit, though...
Heres the Hooker unit, it is imported from Italy and comes in two colors of leather, about a grand less than the TK unit in fabric.
http://www.myfurnitureforum.com/show...Hooker+sleeper
Duane Collie
Straight answers from thirty-six years in the business.
My Private Messages are Disabled - Please ask questions here in the forum.